![]() In this case the cable goes above the retainer. Position the broken piece the way it was inserted before.Ĭarefully insert the cable into the connector. The cable will not stay inside the connector without the locking clip. IMPORTANT! Do not though away the retainer. ![]() On the picture below you can see the retainer broken on both sides. If you are not careful enough, you can move the retainer too far and break it. IMPORTANT! The retainer must remain attached base.Īfter that you can pull the keyboard cable and remove the keyboard. To unlock it properly, you have to move the retainer about 2 millimeters in the direction shown by two yellow arrows. The retainer applies some pressure on the cable and it makes contact with the pins inside the connector. When the connector is closed, the cable secured between the retainer and base. ![]() It has the base (white in my case) and cable retainer (brown in my case). On the picture below I show one of the most common connector types. Unfortunately, this part is not sold separately. The cable retainer (locking clip) is made of thin plastic and if it’s damaged, you are in trouble. It’s very easy to get it damaged if you apply too much force while trying to unlock it. The connector is a very delicate mechanism.
0 Comments
Leave a Reply. |